Building a hot rod means working all the angles, and there are plenty of angles to work. One of the more important angles is the angle between your transmission output shaft (which is the same as the ...

Driveshafts do a big job in our Fords, Mercs, and Lincolns. They take a powertrain's rotary motion and carry it to the differential and drive axles. This is not an easy task. Not only must a ...

Most automobiles today use rigid driveshafts to deliver power from a transmission to the wheels. A pair of short driveshafts is commonly used to send power from a central differential, transmission, ...

When an engine produces power and clutch and transmission convert it into required torque, some assembly is needed to carry this torque to driving axle or usually to rear axle. This assembly is known ...

If you own a JK, you're going to want to lift it. And when you do, you're going to be thinking about how much lift, long arms or stock, which wheels, and how much tire. What you're probably not ...

Every gearhead knows that the transfer of power from an engine to the axle and drive wheel in a rear-wheel drive vehicle requires a driveshaft, and that this highly loaded part is typically made of ...

This story was originally published online December 14, 2017, and has been edited and reformatted by Tim Bernsau. Building a hot rod means working all the angles, and there are plenty of angles to ...